Here's my truck. It's taken many years to build, but is shaping up to be really good:
1991 Jeep Comanche
1983 Mercedes OM617
7.5mm M Pump
T3/4 Hybrid turbo (For now)
4.10 Gears
Ford 8.8 rear axle with limited slip, & C clip eliminator
D-30 up front with Aussie locker & manual hubs (This was a mistake, the diesel snapped the hubs like twigs, hopefully D44 soon)
Converted to - raised - flatbed with 15 gallon auxiliary fuel tank, rear mount battery & smallish trunk / storage area.
32X12.5X15
Doomsday OM617 to AX15 adapter
Doomsday thermostat housing
Doomsday EGR delete
This is what it looked like when purchased:
Here's what it looks like today:
If there is anything someone would like to see please let me know, i have many pictures & videos.
Hello Hal. I made my own engine mounts recently after the non Doomsday brand failed: https://photos.app.goo.gl/R821V51gw5v9gYsUA I can send measurements if you need, but I used an RC lower control arm from a 4" lift kit that wasn't used. I am in the middle of quite a few mods right now, including AC & serpentine. I added an auxiliary fuel tank, but still use the OE tank. All I did for the fuel inlet is remove the flapper valve so a diesel fuel filler will fit.